Shopping Cart

0 item(s) - £0.00

Browse official BV700S-C filters from BenchVent. High-quality particulate filters specifically for the BV700S-C Spray Booth. In order to maintain your Lifetime Guarantee, filters for the BV700S-C should be replaced every 3-4 months to ensure effectiveness and limit stress on the fan and other internal components. 

IFA2 – Particulate filters are designed to capture particles to approximately 5 microns (dust and pollen particles are typically 10-20microns). With a high dust holding capacity for extended life (particularly with sprays), your running costs will be reduced when using BenchVent particulate filters.

FKA2 – Filter kit that includes 3 x IFA2 and 1 x CHA2 (see above).

HEPA - If finer filtration is required a HEPA filter must be used instead of an IFA2. HEPAs are designed to capture very fine particles to approximately 0.3 microns.

PRE – BenchVent PRE filters must be used prior to a HEPA filter.

AC100 - BenchVent Activated Carbon filters remove potentially harmful gases. They offer a high level of adsorption across a wide range of organic compounds. Filters for specific gases/elements can be produced on request e.g. Acids etc.

Any questions please don’t hesitates to contact us on 01423 790039.

Display: List / Grid
Sort By:
Particle Filter IFA2P (Pack of 6)
Pack of 6 particle filters IFA2. For general spray and dust particle capture. For use with BenchV..
Ex Tax: £117.00
Particle Filter HEPA705
EPA particle filter HE705. Pleated EU10 particle filter for fine dusts and powders and solder fum..
Ex Tax: £159.00
Activated Carbon Filter AC100
Activated Carbon Filter AC100. Heavy activated carbon filter for gas and solvent removal. Siz..
Ex Tax: £159.00
Polyester Pre Filter PRE705 (Pack of 6)
   Polyester pre particle filter PRE495. Packed in set of 6 filters. Blue and White..
Ex Tax: £30.00

Registered in England: 03127859 VAT No: 664779479