Shopping Cart

0 item(s) - £0.00

BV660H-D - Ducted Fume Extractor Cabinet

BV660H-D - Ducted Fume Extractor Cabinet
BV660H-D - Ducted Fume Extractor Cabinet BV660H-D - Ducted Fume Extractor Cabinet
Brand: BenchVent
Product Code: BV660H-D
Availability: 10 - 14 days
Price: £1,203.30
Ex Tax: £1,002.75

Available Options

Spare Filter:

Voltage options:

BV660H-D - Ducted Fume Extractor Cabinet

The BenchVent BV660H-D is our flagship hood mounted extract-to-atmosphere cabinet. It's been designed to capture, contain, filter and expel harmful contaminants within electronic design & rework, dental/medical labs, pharmaceutical labs and classroom environments.

What's included with the BV660H-D Extraction Cabinet?

  • Filter unit with fan(s)
  • Hood Enclosure
  • Hood Light
  • Polycarbonate hinged front panel
  • Particulate filter
  • Power Lead
  • Data/Warranty Booklet

What can the BV660H-D hood mounted extract-to-atmosphere cabinet be used for?

The BV660H-D is ideal for use with spray adhesives, conformal coatings and paints, monomers, hazardous powders and particulates, resins, sealants, solders, light grinding particles, organic solvents and cleaners etc.

All handling and/or use of potentially harmful substances is carried out within the hood enclosure in front of the intake filter area. For artwork applications, standard A2 drawing board can be placed within the hood enclosure. The board fits at an angle for efficient overspray capture.

These fume cabinets are designed for immediate operator protection whereby ‘large’ particulates (> 5 microns) are filtered out and ‘fine’ particulates (<5 microns) together with odours, gases, vapours and fumes within the hood enclosure are exhausted to atmosphere via the flexi-duct(s).

The Flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability and/or convenience.

Key Features

  • Can accomodate standard drawing boards
  • Clear polycarbonate panel for protection
  • Hood lighting

Download the datasheet for more information: BV660H-D Datasheet

Lifetime Gurantee on all our hood mounted extract-to-atmosphere cabinets

All BenchVent filtration and extraction systems carry a lifetime guarantee, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on.

High Quality Filters from BenchVent

The particulate (intake) filter is a three stage graduated fibre filter with a high 'dust' holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns. The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces and/or eliminates operator exposures to potentially hazardous substances.

Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundemental requirement of the Control of Substances Hazardous to Health (CoSHH).

General Specification
Dimensions 670x525x450 (wxhxd) [internal] 680x600x450 (wxhxd) [overall]
Description Steel construction finished in dove grey - fan/filter unit mounted onto hood enclosure complete with clear polycarbonate panel and hood lighting - particulate filter - centrifugal blower, external rotor motor type, brushless, UL, VDE and CSA approved - sealed electrical wiring and switch, downstream of filter. Flexi-duct 2 metres x 100mm dia.
Technical Specification
Air Volume at Free Air 355 m3/hr
Ave. Air Velocity at Filter Face 0.60m/sec
Ave. Air Velocity at Hood Face 0.55 m/sec
Fan Motor Spec 230V 50Hz 40W
Filters Particle Filter - IFA3P
Noise Level LAeq dB(A) 58

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Related Products

Registered in England: 03127859 VAT No: 664779479