Shopping Cart

0 item(s) - £0.00

BV200H-D - A2 Ducted Hooded Spray Booth

BV200H-D - A2 Ducted Hooded Spray Booth
BV200H-D - A2 Ducted Hooded Spray Booth BV200H-D - A2 Ducted Hooded Spray Booth
Brand: BenchVent
Product Code: BV200H-D
Availability: 10 - 14 days
Price: £1,001.70
Ex Tax: £834.75

Available Options


Spare Filter:


Voltage options:

BV200H-D - A2 Ducted Hooded Spray Booth

The BenchVent BV200H-D A2 ducted hood mounted extraction cabinet is a general purpose workstation for light aerosol spray and airbrush use. It is designed to capture dust and eliminate fumes/vapours for a safer working environment that meets the CoSHH regulations.

What's included in the BV200H-D?

  • Filter unit with fan(s)
  • Hood Enclosure
  • 1 x Particulate filter
  • Power Lead
  • Data/Warranty Booklet

Download the datasheet for more information: BV200H-D Datasheet

Appliction includes filtration of:

  • Aerosol adhesives (glue booth for Spray Mount)
  • Aerosol lacquers and fixatives 
  • Airbrush sprays applied to artwork up to A1 size. A2 or A1 drawing boards can be placed into the hoods at an angle for efficient overspray capture.

The workstation hood also accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded or sanded etc.

These cabinets are designed for studio / classroom / workshop cleanliness and for immediate operator protection whereby ‘large’ particulates (> 5 microns) are filtered out and ‘fine’ particulates (<5 microns) together with odours, gases, vapours and fumes within the hood enclosure are exhausted to atmosphere via the flexi-duct.

Key Features:

  • 355m³/hr air volume suitable for a wide range of extraction applications
  • Built with a centrifugal blower via a three stage graduated fibre particulate filter complete with a high particle holding capacity, ensuring long filter life
  • Carry handle to aid with portability

Why choose this A2 Hood Mounted Portable Fume Extraction Cabinet?

All BenchVent filtration and extraction systems carry a lifetime guarantee, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on. For artwork applications, standard A2 drawing boards can be placed within the hood enclosure.

The boards fit at an angle for efficient overspray capture. 3D items, models, printed circuit boards etc. may be placed onto the hood base for spraying, cleaning, sanding, gluing etc. The Flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience.

How does the filter system work?

The particulate (intake) filter is a three stage graduated fibre filter with a high ‘dust’ holding capacity for long life. Filtration to approx. 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns. The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces and/or eliminates operator exposures to potentially hazardous substances.

Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundemental requirement of the Control of Substances Hazardous to Health (CoSHH).

General Specification
Dimensions 670x525x450 (wxhxd) [internal] 680x600x450 (wxhxd) [overall]
Description Steel construction finished in dove grey – fan/filter unit mounted onto hood enclosure - particulate filter – centrifugal blower - external rotor motor type, brushless, UL, VDE and CSA approved -sealed electrical wiring and switch, downstream of filter. Flexi-duct 2 metres x 100mm dia.
Technical Specification
Air Volume at Free Air 355m3/hr
Ave. Air Velocity at Filter Face 0.60m/sec
Ave. Air Velocity at Hood Face 0.25m/sec
Fan Motor Spec 230V, 50Hz, 105W
Filters Particle Filter: IFA3
Noise Level LAeq dB(A) 58

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Related Products

Registered in England: 03127859 VAT No: 664779479