Shopping Cart

0 item(s) - £0.00

BV-FUMEC - Single Arm Extraction Unit

BV-FUMEC - Single Arm Extraction Unit
BV-FUMEC - Single Arm Extraction Unit
Product Code: BV-FUMEC
Availability: In Stock
Price: £786.00
Ex Tax: £655.00

BV-FUMEC - Single Arm Extraction Unit

The Fume Cube Single Arm 38mm Arm kit is a single user filtration system for use primarily during hand soldering to contain and filter the soldering fumes that are generated.

Filters available for solder or chemical fume. Supplied with one 38mm stainless steel arm with pen nib nozzle which can be simply attached to the workbench by using a versatile clamp bracket. If the work area moves, the Fume-Cube can be relocated in minutes.

What can the Fume Cube Single Arm 32mm Arm kit Solder Fume Extraction and Fume Filtration Unit be used for?

The Fume Cube Single Arm 38mm Arm allows the end user to capture, contain and filter soldering fumes for a cleaner, healthier working, environment within electronic design, rework, design and technology areas. These portable, single station, plug and play systems are complete with Stainless Steel extraction arm and installation kit to enable the operator to be set up quickly and easily.

Key Features

Automatic electronic flow control - maintains a constant extraction rate even as the filter blocks
Speed control (adjustable airflow)
VariColour filter blocked warning system
Low capital and running costs
Quick change patented Labyrinth pre-filter delivers longer filter life
Submicronic (HEPA Filter) filtration removes 99.997% of particles down to 0.3 microns
Activated Carbon Filters removes harmful gas
Simple to install and quiet in operation
Easy to relocate and precision made from stainless steel
Optional interfacing option to interface with other equipment such as laser.

Why buy the BV200-A Benchtop Solder Fume Extraction Unit?

Quiet in operation and assembled in seconds. It's floor standing fan/filter box is fitted to desk/bench by way of flexible installation pipe and table bracket. The stay put arm is fitted on top of the desk/bench and manoeuvred into required extraction position. It comes with a 12 month return to base warranty.

How are soldering fumes filtered and extracted?

The particulate (intake) filter is a 99.997% HEPA filter which provides gas filtration via deep, granulated, carbon gas filter. The unit also benefits from a blocked filter indicator to facilitate correct filter change times to maintain efficient filtration. Through the process of filtration, adsorption and dilution, operator exposure to potentially hazardous soldering fumes substances is vastly reduced or eliminated.

These units are designed for immediate operator protection from concentrations of airborne contaminants whereby all gases, fumes, vapours and particulates on top of the unit are drawn into the intake filter. Cleaned air is exhausted to the base of the bench. Higher grade filters are available on request.

Demonstrating adequate control of the risks to the health of employees, students and the general public, from dusts, powders, mists, soldering fumes and vapours is a fundamental requirement of the Control of Substances Hazardous to Health (COSHH) regulations 2002 and 2004.

General Specification
Dimensions 366x294x308m hxwxd
Duct Length 3mtrs
Duct Size 38mm
Extraction Arm Length 1000mm
Hose Diameter 50mm
Weight 17kgs
Description Stainless Steel construction fan/filter unit – Floor mounted fan/filter unit – Centrifugal fan motor – 38mm Stainless stay put extraction arm – 3mtrs x 50mm installation flexi tube – table bracket – Filter Blocked indicator - Speed Control

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Registered in England: 03127859 VAT No: 664779479