Shopping Cart

0 item(s) - £0.00

BenchVent BV300S-D

BenchVent BV300S-D
BenchVent BV300S-D BenchVent BV300S-D BenchVent BV300S-D BenchVent BV300S-D BenchVent BV300S-D BenchVent BV300S-D
Brand: BenchVent
Product Code: BV300S-D
Availability: 10 - 14 days
Price: £299.99
Ex Tax: £249.99

Available Options

Spare Filter:

Voltage options:

BenchVent BV300S-D

The BenchVent BV300S-D, an A3 Extraction Unit for Aerosols, Airbrushes and more. This high quality extraction system contains, filters and extracts harmful particulates for a cleaner, healthier working environment; making it ideal for the hobbyist, modeller and arts and craft enthusiast.

What's included with the BV300S-D?

  • Filter unit with fan and 2mtrs flexi-duct
  • Spray Shield
  • 1 x Particulate filter
  • Power Lead
  • Data/Warranty Booklet

Download the datasheet for more information: BV300S-D Datasheet

Video Review of the BV300S-D Spray Booth & Extraction Unit

What can the BV300S-D Extraction System be used for?

The design of this unit makes it ideal for applications that include filtration and removal of: Aerosol paints, lacquers, adhesives and airbrush overspray. It's also well suited to extracting solder fumes, general solvent vapours and gases extracted to atmosphere. It's design also means it can be used for dust extraction (from grinding etc) as well as general particulates and powders. This is an extraction unit i.e. all odours and gases and extracted to atmosphere.

Key Features

  • Replaceable plastic spray/fume shield
  • Carry handle
  • Can be assembled in seconds

Why choose this A3 Extraction Unit?

All BenchVent filtration and extraction units come with a lifetime guarantee, are quiet in operation and are extremely quick to get up and running. All that's required is to place the extraction unit on a desk or trolley and simply plug it in and switch on. Because the BV300S-D is an extraction unit it comes complete with our Flexi-Duct to atmosphere extraction fittings. The Flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience.

This unit can be used in two positions:

Horizontal position

For Spray Mount, aerosol lacquers and fixatives etc. applied to artwork placed onto the filter. Accommodates artwork up to A3 size.

Vertical position

For model sprays and airbrush use - light grinding particles (not sparking) - solder fume extraction and general solvent and gas extraction.

Filtration Method

The particulate (intake) filter is a three stage graduated fibre filter with a high 'dust' holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns. The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces and/or eliminates operator exposure to potentially hazardous substances.

Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundemental requirement of the Control of Substances Hazardous to Health (CoSHH).

General Specification
Dimensions 505x390x430 (wxhxd)
Description Steel construction finished in dove grey - plastic replaceable spray/fume shield - particulate filter - centrifugal blower, external rotor motor type brushless, UL, VDE and CSA approved - sealed electrical wiring and switch, downstream of filter. Flexi-duct 2 metres x 100mm dia. - carry handle.
Technical Specification
Air Volume at Free Air 355 m3/hr
Ave. Air Velocity at Filter Face 0.60m/sec
Ave. Air Velocity at Shield Face 0.55m/sec
Fan Motor Spec 230V 50Hz 105W
Filters Particle Filter: IFA3
Noise Level LAeq dB(A) 58

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Related Products

Registered in England: 03127859 VAT No: 664779479