Shopping Cart

0 item(s) - £0.00

BenchVent Pure 200

BenchVent Pure 200
BenchVent Pure 200 BenchVent Pure 200
Product Code: BV-P200
Availability: In Stock
Price: £603.84
Ex Tax: £503.20

BenchVent Pure 200

The Pure 200 Salon Fume Extraction System from BenchVent. If your salon does not have adequate ventilation, both your employees and customers could be susceptible to various ailments associated with the fumes and nail dust created daily within a salon environment.

How does the Pure 200 Salon Extraction System work?

The Pure Beauty system has been designed to quietly and efficiently extract and remove harmful fumes caused by chemicals produced in the salon. Many systems currently available on the market are simply elaborate fans or air purifiers and do not extract fumes to the levels required by law.

Pure Beauty achieves a high level of extraction and capture by using 2 levels of filtration: The first is in a Particulate Filter . This traps fine dust. The second is a Carbon Filter which adsorbs vapours within the carbon granules

Key Features of the Pure 200 Nail Dust and Salon Extraction Unit

The Pure200 extraction system will fit easily into any salon, without the costly need to replace existing nail stations or furniture.

  • Portable and Adaptable
  • Available in Black or White
  • Easy to Install and Easy to Use
  • Removes Toxic Fumes and Dust
  • No need to replace existing Salon Furniture
  • Adheres to regulatory Health and Safety Standards

Why is the Pure 200 the right choice for your salon?

PURE200 has been designed exclusively for the beauty industry. Our years of knowledge in the extraction and filtration industry have helped to develop salon friendly fume extraction solution, designed to specifically remove and safely capture a range of harmful and toxic fumes and dust found in the salon environment.

Numerous products used in Beauty Salons contain a variety of chemicals that may be potentially harmful to the health of employees and customers alike, as well as damaging to the environment. Extraction is extremely important if you are using or are in contact with any hazardous substances.

According to the HSE (Health & Safety Executive), a good standard of ventilation is recommended (SR13) and an extractor hood or downdraught table is suggested. However, in this study only roughly a tenth of salons used ventilated tables. Dust masks are not acceptable as a control (according to the COSHH Essentials SR13 guide on nail bars), yet in approximately a half of the salons inspected, employees wore a disposable dust mask when carrying out nail services.

Due to the chemicals they contain, many of the products used daily in Beauty Salons may be potentially harmful to the health of employees and customers alike, as well as damaging to the environment. In some areas, it is now mandatory that an salon extraction system is installed if you are using or are in contact with hazardous substances such as hardeners, drying agents, curing agents, MMA (Methyl Methacrylate) and Nail Dust as well as other solvent based products. MMA is considered the most hazardous in general with long term exposure to MMA can cause damage to the respiratory system and the liver.

General Specification
Dimensions 260x260x370 (wxdxh)
Description steel-constructed and they use a recirculatory system, i.e. filtered air is exhausted back into the workplace.Comprise of particulate filter with pad filter, granulated carbon gas filter, radial blower IP54 synchronous brushless motor, 50mm stay put extraction arm, table bracket, installation flex-illuminated on/off switch, filter blocked indicator
Technical Specification
Air Volume at Free Air 90m3/hr
Ave. Air Velocity at Nozzle Appeture 1.5m/sec
Fan Motor Spec 230V 50Hz 60W
Filters Particle Filter. Carbon Gas filter
Noise Level LAeq dB(A) 54

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Related Products

Registered in England: 03127859 VAT No: 664779479