Shopping Cart

0 item(s) - £0.00

BV200H - A2 Hooded Spray Booth

BV200H - A2 Hooded Spray Booth
BV200H - A2 Hooded Spray Booth BV200H - A2 Hooded Spray Booth BV200H - A2 Hooded Spray Booth
Brand: BenchVent
Product Code: BV200H
Availability: 10 - 14 days
Price: £837.90
Ex Tax: £698.25

Available Options


Spare Filter:




Voltage options:

BV200H - A2 Hooded Spray Booth

The BV200H is a hooded spraybooth designed to capture, contain and filter potentially harmful substances within art, graphics, design technology areas, crafts and modelling. It can take up anyting up to an A2 size material. It is a necessity for the health and safety of operators who work in areas where there are solvents and dusts. This includes DT rooms andart and graphics workrooms in education and commercial environment.

What's included with the BV200H Unit?

  • Filter unit with fan(s)
  • Hood Enclosure
  • Particulate filter
  • Charcoal Impregnated fibre filter
  • Power Lead
  • Data/Warranty Booklet

Download the datasheet for more information: BV200H Datasheet

Key Features

  • The workstation hood also accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded, sanded etc.
  • Sealed electrical wiring and switch, downstream of filters
  • Brushless motor with external rotor

Why choose BenchVn BV200H over other brands?

  • All BenchVent filtration and extraction systems carry a lifetime guarantee.
  • They are made in the UK, so it's easy to get technical support.
  • They are quiet in operation.
  • They portable and simple to use. Just place onto a desk, bench or trolley, then simply plug in and switch on.
  • The hooded spray both can be used in a variety fo ways; for artwork applications, standard A2 drawing boards can be placed within the hood enclosure.
  • The boards fit at an angle for efficient overspray capture. 3D items, models, printed circuit boards etc. may be placed onto the hood base for spraying, cleaning and sanding etc.

How are substances filtered and extracted?

The particulate (intake) filter is a three stage graduated fibre filter with a high ‘dust’ holding capacity for long life. Filtration to 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns.

The carbon impregnated fibre filter (behind intake) assists in the reduction of solvent odours. Through the process of filtration, adsorption and dilution, operator exposure to concentrations of potentially hazardous substances is vastly reduced. These units are designed predominantly for studio / classroom / workshop cleanliness and for immediate operator protection from concentrations of airborne contaminants.

The BV200H is not recommended for continual usage, i.e. production applications, particularly in confined and/or badly ventilated areas. For this, you will need a ducted unit like the BV200H-D, BV930H-D, or BV660H-D

 

Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundemental requirement of the Control of Substances Hazardous to Health (CoSHH).

General Specification
Dimensions 670 x 525 x 450 (wxhxd) [internal] 680 x 600 x 450 (wxhxd) [overall]
Description Steel construction finished in dove grey – fan/filter unit mounted onto hood enclosure - particulate filter – carbon impregnated fibre filter – axial fan(s), external rotor motor type brushless, UL, VDE and CSA approved - sealed electrical wiring and switch, downstream of filters.
Technical Specification
Air Volume at Free Air 325m3/hr
Ave. Air Velocity at Filter Face 0.50m/sec
Ave. Air Velocity at Hood Face 0.25m/sec
Fan Motor Spec 230V*, 50HZ, 40W (110V available on request)
Filters Particulate Filter: IFA3 - Charcoal Filter: - CHA3 - Filter Kit: FKA3
Noise Level LAeq dB(A) 59

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Related Products

Registered in England: 03127859 VAT No: 664779479