Shopping Cart

0 item(s) - £0.00

BenchVent BV250-A

BenchVent BV250-A
BenchVent BV250-A
Product Code: BV250-A
Availability: 10 - 14 days
Price: £625.26
Ex Tax: £521.05

Available Options

* Spare Filter:

* Voltage options:

Speed Controller:

BenchVent BV250-A

The BenchVent BV250-A Fume Filtration Arm Extraction Unit. Allows the user to capture, contain and filter harmful fumes for a cleaner, healthier working environment within electronic design, rework, design and technology areas.

Who is the BV250-A Extraction Unit For?

This fume extraction unit has been designed for use primarily during hand soldering to contain and filter the solder fumes which are generated in operation. The BV250-A is a two user, plug and play filtration system which comes complete with extraction arms and installation kits to enable two operators to be set up quickly and easily and without major installation costs.

This makes them easy to move if factory layouts change. The BV250-A comes complete with flush sealing mount plate, 2 x50mm ESD Stay Put arms, installation flex and table bracket.

Optional remote speed controller is available. It's low noise level and fully integrated filtration with long life filters are ideal for changing production demands.

Key Features

  • Two user unit
  • Quiet in operation
  • Designed with portability in mind

Why choose the BV250-A Fume Extraction System?

Quiet in operation and assembled in seconds the BV250-A floor standing fan/filter box is fitted to desk/bench by way of flexible installation pipe and table bracket. The stay put arm is fitted on top of desk/bench and manoeuvred into required extraction position. 12 month return to base warranty. With an unrivaled build quality this unit is ideal for high volume, at source, soldering applications where tip extraction is not required.

How does the unit filter away harmful solder fumes?

The particulate (intake) filter is a 99.9997% HEPA filter to 0.3 micron. Gas filtration via deep, granulated, carbon gas filter. The unit also benefits from a blocked filter indicator to facilitate correct filter change times to maintain efficient filtration. Through the process of filtration, adsorption and dilution, operator exposure to potentially hazardous substances is vastly reduced or eliminated.

This unit is designed for immediate operator protection from concentrations of airborne contaminants whereby all fumes and particulates within the arm enclosure are filtered and cleaned air is exhausted through the base of the cabinet.

Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundemental requirement of the Control of Substances Hazardous to Health (CoSHH).

General Specification
Dimensions 380x260x26 (hxwxd)
Duct Length 5mtrs
Duct Size 75mm
Extraction Arm Length 750mm
Hose Diameter 50mm
Description Steel construction fan/filter unit finished in white – Floor mounted fan/filter unit – Centrifugal fan motor – 2x50mm ESD stay put extraction arms – 2x3mtrs x 50mm installation flexi tube – table bracket – flip top flush sealing mounting plate - Filter Blocked indicator.
Technical Specification
Ave. Air Velocity at Filter Face 180m3/hr
Fan Motor Spec 230V 50Hz (110V 60Hz option)
Filters Carbon/HEPA
Noise Level LAeq dB(A) 55

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Related Products

Registered in England: 03127859 VAT No: 664779479