Shopping Cart

0 item(s) - £0.00

BenchVent BV200S

BenchVent BV200S
BenchVent BV200S
Brand: BenchVent
Product Code: BV200S
Availability: 10 - 14 days
Price: £492.00
Ex Tax: £410.00

Available Options


Spare Filter:




Voltage options:



BenchVent BV200S

The BenchVent BV200S, an A2 glue booth to contain and filter for a cleaner, healthier working environment within art, graphics, craft and modelling environments.

What's included with the BV200S?

  • Filter unit with fan(s) and back stand attached
  • Spray Shield
  • 1 x Particulate filter
  • 1 x Charcoal Impregnated fibre filter
  • Power Lead
  • Data/Warranty Booklet

Download the datasheet for more information: BV200S Datasheet

What is the BV200S Glue Booth used for?

The BV200s it suited to applications where glues, aerosols and airbrushes are in use. The units are designed predominantly for studio / classroom / workshop cleanliness and for immediate operator protection from concentrations of airborne contaminants.

They are not recommended for continual usage, i.e. production applications, particularly in confined and/or badly ventilated areas.

Key Features

  • Quiet in operation
  • Steel construction
  • Dove grey finish
  • Replaceable plastic spray/fume shield

What makes the BV200s the right glue booth for you?

All BenchVent filtration and extraction systems carry a lifetime warranty, and have been designed to be quiet in operation. The BV200s can be assembled in seconds. Simly place it onto a desk, bench or trolley and then simply plug in and switch on.

Designed with portability in mind, they're ideal for use within art, graphics, hobby, modelling and craft environments where the filtration of aerosol adhesives, aerosol lacquers and fixatives and airbrush sprays applied to artwork is essential.

The BV200s is equally capable of extracting solder fumes ,light grinding particles and dusts and cleaning solvents etc.

These units can be used in two positions:

Reclining position (on back-stand)

For Spray Mount, aerosol lacquers and fixatives etc. Applied to artwork placed onto the filter. BV200S accommodates artwork up to A2 size.

Upright position

For model sprays and airbrush use – light grinding particles – solder fume displacement – general solvent dilution etc.

How does the BV200s Glue Booth filter away hamrful substances like glue solvents?

The particulate (intake) filter is a three stage graduated fibre filter with a high ‘dust’ holding capacity for long life . Filtration to 5 micron particles . NB: Spray particulate sizes vary from 10 to 20 microns .The carbon impregnated fibre filter (behind intake) assists in the reduction of solvent odours . Through the process of filtration, adsorption and dilution, operator exposure to concentrations of potentially hazardous substances is vastly reduced.

Demonstrating adequate control of the risks to the health of employees students and the general public, from dusts, powders, mists, fumes and vapours is the fundemental requirement of the Control of Substances Hazardous to Health (CoSHH).

General Specification
Dimensions 720x430x515 (wxdxh)
Description Steel construction finished in dove grey –– plastic replaceable spray/fume shield – back stand / carry handle - particulate filter – carbon impregnated fibre filter – axial fan, external rotor motor type brushless, UL, VDE and CSA approved - sealed electrical wiring and switch, downstream of filters.
Technical Specification
Air Volume at Free Air 650m3/hr
Ave. Air Velocity at Filter Face 0.50m/sec
Ave. Air Velocity at Shield Face 0.35m/sec
Fan Motor Spec 230V 50Hz 80W
Filters Particle Filter: IFA2 - Charcoal Filter: CHA2 - Filter Kit: FKA2
Noise Level LAeq dB(A) 61

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Related Products

Registered in England: 03127859 VAT No: 664779479