Shopping Cart

0 item(s) - £0.00

BV200-A - Solder Fume Extraction Unit

BV200-A - Solder Fume Extraction Unit
BV200-A - Solder Fume Extraction Unit
Product Code: BV200-A
Availability: 10 - 14 days
Price: £498.95
Ex Tax: £415.79

Available Options


* Spare Filter:



* Voltage options:



BV200-A - Solder Fume Extraction Unit

The BV200-A is a single user filtration system for use primarily during hand soldering to contain and filter the soldering fumes that are generated.

What can the BV200-A Solder Fume Extraction and Fume Filtration Unit be used for?

The BV200-A allows the end user to capture, contain and filter soldering fumes for a cleaner, healthier working, environment within electronic design, rework, design and technology areas. These portable, single station, plug and play systems are complete with ESD extraction arm and installation kit to enable the operator to be set up quickly and easily.

Key Features

  • No major installation costs required making them easy to move with the workbench if factory layouts change.
  • Comes complete with a flip top flush sealing mount plate, 50mm ESD Stay Put extraction arm and installation flex and bracket.
  • Low noise level and fully integrated filtration with long life filters are ideal for changing production demands.
  • Ideal for high volume, at source, soldering applications where tip extraction is not required.

Why buy the BV200-A Benchtop Solder Fume Extraction Unit?

Quiet in operation and assembled in seconds. It's floor standing fan/filter box is fitted to desk/bench by way of flexible installation pipe and table bracket. The stay put arm is fitted on top of the desk/bench and manoeuvred into required extraction position. It comes with a 12 month return to base warranty.

How are soldering fumes filtered and extracted?

The particulate (intake) filter is a 99.997% HEPA filter which provides gas filtration via deep, granulated, carbon gas filter. The unit also benefits from a blocked filter indicator to facilitate correct filter change times to maintain efficient filtration. Through the process of filtration, adsorption and dilution, operator exposure to potentially hazardous soldering fumes substances is vastly reduced or eliminated.

These units are designed for immediate operator protection from concentrations of airborne contaminants whereby all gases, fumes, vapours and particulates on top of the unit are drawn into the intake filter. Cleaned air is exhausted to the base of the bench. Higher grade filters are available on request.

Demonstrating adequate control of the risks to the health of employees, students and the general public, from dusts, powders, mists, soldering fumes and vapours is a fundamental requirement of the Control of Substances Hazardous to Health (COSHH) regulations 2002 and 2004.

General Specification
Dimensions 380x260x260 (hxwxd)
Duct Length 3mtrs
Duct Size 50mm
Extraction Arm Length 750mm
Hose Diameter 50mm
Weight 8kgs
Description Steel construction fan/filter unit finished in white – Floor mounted fan/filter unit – Centrifugal fan motor – 50mm ESD stay put extraction arm – 3mtrs x 50mm installation flexi tube – table bracket – flip top flush sealing mounting plate
Technical Specification
Air Volume at Free Air 90m3/hr
Ave. Air Velocity at Nozzle Appeture 90m3/hr
Filters Carbon/HEPA
Noise Level LAeq dB(A) 54

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Related Products

Registered in England: 03127859 VAT No: 664779479