Shopping Cart

0 item(s) - £0.00

BV-FPW- BenchVent Downdraught Welding Fume Bench

BV-FPW- BenchVent Downdraught Welding Fume Bench
BV-FPW- BenchVent Downdraught Welding Fume Bench
Product Code: BV-FPW
Availability: 10 - 14 days
Price: £0.00
Ex Tax: £0.00

Available Options


* Voltage options:



BV-FPW- BenchVent Downdraught Welding Fume Bench

 

BV-FPW - Downdraught Filtration Bench

Downdraught Filtration bench to contain and filter for a cleaner, healthier working environment within factorys and engineering workshops etc.

For use in numerous situations where external venting is impractical but where contaminant of dust and debris capture is necessary.

Applications include the filtration of dust and debris particulates emanating from:

  • Welding
  • Brazing
  • Grinding
  • Fettling

Operation:

The BV-FPW range is of quality finish and well suited to installation in workshops and engineering sites where welding, grinding and fettling will take palce

It is suitable for surface loads up to 150kg. (Heavier loads can be catered for on request)

Optional accessories include: Remote fans for ducting to external vent system, electronic speed control, enclosures, "hours run" meter and castors to enable the bench to be easily moved around the work space.

Filtration:

This configuration features a unique 3 stage filter process. The first stage captures larger particles while the second stage features very low cost disposable pads to protect the main filter and extend its life to minimise filter costs; multiple direction changes promote drop out of the heavy particles which form most of the debris and dust in these operations. This configuration reduces the load on the final F9 media filter and hence reduces overall running costs.

The main main media is housed to the left of the working section and accessed through a service hatch in the form of a removable door. The two stage pre filters are housed in the main bench body.

Filters Sets include:

D: Welding fumes and sparks, K: Grinding and Fettling

Through the process of filtration, adsorption and dilution, operator exposure to potentially hazardous substances is vastly reduced or eliminated.

Due to price variations depending on filter specification' please contact our sales team for exact prices. Prices start from £3650.00

 

 

General Specification
Dimensions Overall: 1950Wx960Dx840H mm - Working area 1210Wx650Dmm
Description Body of 2mm welded steel formed panels powder coated. Top of 3mm perforated powder coated mild steel. Positively clamped filter housing with filter access via removable top surface for cleaning and replacement. Integral 240v fanset (110V version available), IP56 motor enclosure, on/off switch, 3mtr mains lead and fused plug.
Technical Specification
Air Volume at Free Air 2000m3/hr
Ave. Air Velocity at Filter Face 1.5m/sec
Fan Motor Spec 240V 50Hz. Wattage: 570W
Filters D: Welding and Brazing, K: Grinding and fettling with sparks

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Registered in England: 03127859 VAT No: 664779479